1
/
of
4
My Store
Forward Controls Design OPF-G, RMR
Forward Controls Design OPF-G, RMR
Regular price
$46.00 USD
Regular price
$72.50 USD
Sale price
$46.00 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
OPF-G, RMR is compatible with RMR, SRO, and the new RMR HD and RCR. If your RMR, RMR HD, and SRO come with sight to plate 6-32 screws, be sure to only use the 3/8" screws, do not use longer 1/2: screws.
Do not use our sight to plate screws with Holosun sights. The screws we supply are for Trijicon RMR and SRO only. From October of 2023, we've begun to transition T10 sight to plate screws to T15.
OPF-G, RMR is designed for GLOCK's MOS and Trijicon RMR and SRO. If you use a Holosun and the long set of screws with OPF-G, RMR, you will risk damaging the plate. Holosun sights have 90 degree countersink screw holes, while RMR and SRO use 82 degree countersink. In addition, the supplied RMR sight to plate screws (6-32 x 3/8) are longer than what Holosun includes. Do not use our sight to plate screws with Holosun sights.
Our plates are made in ordnance grade 4140 steel, but it's not immune to user induced abuse. This can happen if the wrong Holosun screws are used with our plate.
OPF-G, RMR's shape follows its functions, same as all of our products. We outlined the following objectives:
1. Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
2. Eliminate the need to use an additional sealer plate.
3. Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
4. Adapter plate is to be machined in steel.
OPF-G, RMR accomplishes all of the goals outlined above. Machined in 4140 steel, and black nitrided, OPF-G, RMR's thickness is unchanged from that of the GLOCK MOS plate, it doesn't change the sight's mounted height, nor does it require different iron sights.
OPF-RMR is shipped with plate to slide screws (M3-0.5mm x 6mm, same as what GLOCK MOS plates uses), and sight to plate screws (6/32 x 3/8), a VC3 packet.
Weight: 0.86 oz
Plate to slide torque value: 13 in/lb
Sight to plate torque value: 13 in/lb
Proudly designed and made in USA.
*Previously mounted. Normal wear.
Share
